ojpro7510 First Time Setup

  • Remove the printer from the box.
  • Remove all tape and packing materials from the outside of the printer.
  • Remove the sticker on the printer control panel, scanner lid and the input tray.
  • Now, close the input tray and open the output tray.
  • Connect one side of the power cord to the printer, and  the other end  into an electrical outlet.
  • Turn on the printer.
  • On the printer control panel, touch your preferred language and country/region, date and time to your choice and click yes to continue.
  • Open the ink carriage to insert the cartridges.
  • Wait until the carriage is idle and silent before you proceed.
  • Remove the packing material from the carriage. Remove the orange lids in the cartridges. Insert the ink cartridges properly in accordance to the colours
  • Close the ink cartridge access door.
  • Load paper into the input tray.
  • After loading paper, the printer control panel displays a message to align the printer. Pull out the tray extender, and then touch OK.
  • An alignment page prints.
  • After the alignment page ejects, lift the scanner lid.
  • Place the alignment page with the print side down on the scanner glass.
  • Close the scanner lid, and then touchScan.
  • Your HP printer hardware is set up and you can now install the printing software. Do not connect the printer to a computer until instructed to do so in the printing software.